我公司主要生產無機保溫砂漿、玻化微珠保溫砂漿、珍珠巖保溫砂漿、聚苯顆粒保溫砂漿、硅酸鹽保溫砂漿、硅酸鎂保溫砂漿,歡迎前來選購

首頁 >> 公司新聞 >>疑難解答 >> 復合硅酸鋁保溫砂漿
详细内容

復合硅酸鋁保溫砂漿

时间:2016-07-22     作者:www。hdbwsj。com【转载】   阅读

硅酸鋁保溫砂漿介紹


復合硅酸鋁保溫砂漿是以多種天然富含鋁、鎂的纖維狀硅酸鹽非金屬材料(多種微米顆粒、納米孔徑,具有截面積為0.36 nm x 1.06 nm的管狀貫穿通道及高達900 m / 克的理論表面積、具良好的粘結性和熱穩定性、導熱系數小于0.053 w/m·K的無機礦物質),添加一定量的無機輔料,經復合加工制成的一種單組分、高性能、綠色環保的新型墻體保溫隔熱材料。可廣泛應用于新舊建筑物保溫隔熱工程,有效改善室內熱環境。保溫隔熱系統由復合硅酸鋁保溫砂漿保溫隔熱層和防水抗裂抹面砂漿防護層兩部分組成,保溫隔熱系統外墻飾面層可采用涂料或面磚飾面,是實現建筑物圍護結構節能設計的最佳選擇。復合硅酸鋁保溫砂漿,符合國家標準GB/T 20473-2006《建筑保溫砂漿》規定要求。產品能直接與建筑物基層構成保溫系統,適用于建筑節能50%和65%目標要求的新建擴建和既有房屋改造的工業及民用建筑墻體內外保溫和分戶墻、地下室、樓梯、走廊、消防通道、熱橋的保溫隔熱,也可與其他保溫材料復合構成外墻保溫系統,適用于EPS、XPS 保溫層的找平防火層或保護層等。
Composite aluminum silicate insulation mortar is a variety of natural aluminum, magnesium, fiber silicate non-metallic materials (a variety of micron particles, nano pore size, with a cross-sectional area of 0.36 x nm 1.06 nm tubular penetration and up to 900 m / g of theoretical surface area, with good adhesion and thermal stability, thermal conductivity is less than 0.053 w/m - K, a single component, high performance, green environmental protection of new wall insulation materials. Can be widely used in the old and new buildings heat insulation engineering, effectively improve the indoor thermal environment. Thermal insulation system made of composite aluminum silicate insulation layer and waterproof cracking mortar protection layer two part insulation mortar, thermal insulation system of exterior wall facing layer can be used in paint or brick, is the best choice for building envelope energy efficiency design. Composite aluminum silicate insulation mortar, in line with the national standard 20473-2006 GB/T "building insulation mortar" requirements. The product can directly form the insulation system and building base, application of thermal insulation for building energy conservation in 50% and 65% the goal of the new expansion and transformation of the existing building industrial and civil building wall insulation and wall, basement, staircases, corridors, fire channel, bridge, and other insulation materials can be combined to form the wall insulation system, applicable to EPS, XPS insulation fireproof leveling or protective layer etc..

硅酸鋁鎂保溫砂漿特性


復合硅酸鋁保溫砂漿 溫度穩定性和化學穩定性良好:
The temperature stability and chemical stability of composite aluminum silicate insulation mortar are good:
保溫隔熱系統在-40~800℃溫度范圍內急冷急熱,保溫層具不開裂、不脫落、不燃燒、耐酸、堿、油等優點。彌補了傳統的墻體保溫材料存在的吸水率高,易老化,體積收縮率大,產品后期強度低和空鼓開裂降低保溫性能等缺陷,同時又彌補了聚苯顆粒有機材料易燃、防火性差、高溫產生有害氣體和強度低、反彈性大等不足,與建筑物墻體同壽命。
Insulation system in -40~800 temperature range within a thermal insulation layer with advantages, no cracking, no shedding, no burning, acid, alkali, oil etc.. To make up for the traditional water wall thermal insulation material has a high rate of aging, volume shrinkage, strength of products is low and reduce the insulation defects such as cracking, while up for polystyrene organic materials flammable, poor fire, high temperature insufficient production of harmful gases and low strength, flexible, with the life of the building wall.
復合硅酸鋁保溫砂漿 施工簡便、綜合造價低:
Composite aluminum silicate insulation mortar construction is simple, comprehensive cost is low:
可直接抹在毛坯墻上,其施工方法與水泥砂漿找平層相同。該產品使用的機械 ,工具簡單,高效便利,與其他保溫系統相比有明顯的施工周期短、工程質量容易控制的優勢。
Can be directly put in the blank wall, the construction method and the cement mortar layer. This product uses the machinery, the tool is simple, highly effective and convenient, compared with other thermal insulation system has the obvious construction cycle is short, the project quality is easy to control the superiority.
復合硅酸鋁保溫砂漿 適用范圍廣、阻止冷熱橋產生:
Composite aluminum silicate insulation mortar has wide application range, prevent cold bridges produce:
適用于各種墻體基層材質及各種形狀復雜墻體的保溫。基層可以是鋼筋混凝土墻及砌體墻,保溫層全封閉、無接縫、無空腔,沒有冷熱橋產生。不僅用于外墻外保溫還可以用于外墻內保溫,或者外墻內外同時保溫,及屋頂的保溫和地暖的保溫層,為節能體系的設計提供了全新的選擇。
Applies to all kinds of wall material and various shapes of the complex wall of the insulation. Base can be reinforced concrete walls and masonry wall, the insulation layer is fully closed, no seams, no cavity, no cold bridges have. Not only can also be used for exterior insulation for exterior insulation, or exterior wall insulation layer and outside the insulation, roof insulation and heating, provides a new choice for the design of energy saving system.
復合硅酸鋁保溫砂漿 強度高、保溫效果好、系統持久耐用:
Composite aluminum silicate insulation mortar with high strength, good thermal insulation effect, and lasting durability of the system:
與基層粘結強度高,不產生裂紋及空鼓,有效防止溫差應力對墻體的破壞,是墻體保溫材料中安全系數最高,綜合性能和施工性能最理想的保溫材料,與國內其他墻體保溫隔熱材料相比具有技術優勢和性能優勢。
The basic and high bonding strength, no cracking and hollowing, effectively prevent the thermal stress of the wall is destroyed, wall insulation materials the highest safety factor, comprehensive performance and construction performance of thermal insulation material is the most ideal, and other domestic wall insulation material has the advantage of technology and performance advantages.
復合硅酸鋁保溫砂漿 綠色環保、無公害、安全性能好:
Composite aluminum silicate insulation mortar green, pollution-free, safety performance is good:
材料燃燒性能為A級不燃材料,無毒、無味、無放射性污染,對環境和人體無害,具有良好的環境保護效益。可廣泛用于密集型住宅、公共建筑、大型公共場所、易燃易爆場所、對防火要求嚴格場所。還可作為防火隔離帶施工,提高建筑物的防火標準。
Material combustion performance for a non combustible material, non-toxic, tasteless, non radioactive pollution, the environment and human health, has a good environmental protection benefit. Can be widely used in the intensive residential, public buildings, large public places, flammable and explosive places, the fire prevention requirements of strict places. Can also be used as a fire prevention and isolation with construction, improve the building's fire prevention standards.


硅酸鋁保溫砂漿使用方法


按保溫砂漿:水 = 1:0.8-1.2的重量比配料。
According to the insulation mortar: water = 1:0.8-1.2 weight ratio of ingredients.
先把清水倒入桶中,再加入保溫砂漿,用電動攪拌器攪拌成均勻的膏漿狀,靜置3-5分鐘后,再略做攪拌,即可使用。
First put the water into the bucket, and then add the insulation mortar, using electric mixer to stir into a uniform paste paste, static 3-5 minutes, then stir, you can use.
用刮板或抹刀均勻抹于工作面上。
Use scraper or spatula evenly on the working surface.
養護3-7天后即可進行下道工序。
3-7 days after the maintenance can be carried out the next process.
參考用量:基面平整,保溫層厚度為15 mm 的情況下,用量約為4.5-6.0公斤/平方米。

Dosage: surface smooth, insulating layer thickness is 15 mm, the amount of about 4。5-6。0 kg / m2。


硅酸鋁保溫砂漿施工流程


對基層做界面處理:基層應當是用水泥砂漿粉刷過的砂漿基層,平整、牢固、無空鼓、開裂等現象。墻面平整度應達到中級抹灰≤4mm驗收標準。
Do interface treatment on the base: the base should be painted with cement mortar base, smooth, firm, no hollowing, cracking phenomenon. Wall roughness should reach the intermediate plastering acceptance standard is less than or equal to 4mm.
批刮10-30mm厚的復合硅酸鋁保溫砂漿,在保溫層施工完畢2-3天后待保溫層全部干燥方可批刮聚合物防水抗裂抹面砂漿。
Composite aluminum silicate scraping 10-30mm thick insulation mortar, thermal insulation layer construction is completed in 2-3 days after all insulation dry before scraping the polymer waterproof cracking mortar.
瓷磚飾面:在復合硅酸鋁保溫砂漿保溫層表面批刮一層聚合物防水抗裂抹面砂漿,然后將鍍鋅鋼絲網平鋪,每平方米用9個錨固釘固定,然后再批刮聚合物防水抗裂抹面砂漿,最后用強力瓷磚石材粘結劑及彩色防水防霉填縫劑完成飾面磚的鋪貼和填縫工作。
Tile: in composite aluminum silicate insulation mortar layer surface scraping a layer of polymer waterproof cracking mortar, then galvanized steel wire mesh and tile, per square meter with 9 anchor nail fixation, and then scraping the polymer waterproof cracking mortar, finally a strong stone tile adhesive and sealant decorative finish color waterproof mildew brick paving and caulking work.
涂料飾面:在復合硅酸鋁保溫砂漿保溫層表面批刮一層聚合物防水抗裂抹面砂漿,然后將耐堿玻纖網格布平鋪后,再刮涂一層聚合物防水抗裂抹面砂漿,轉角和門窗開口處做增強處理。聚合物防水抗裂抹面砂漿和耐堿玻纖網格布共同組成保溫體系的保護層,然后批刮柔性專用膩子,最后涂刷飾面涂料。
Paint finishes: in composite aluminum silicate insulation mortar layer surface scraping a layer of polymer waterproof cracking mortar, then alkali fiberglass mesh cloth tile, then scraping a layer of polymer waterproof cracking mortar, windows and doors opening angle and enhancement processing. The protective layer of polymer waterproof cracking mortar and alkali resistant fiberglass mesh is composed of heat insulation system, then scraping special flexible putty, finally finishing paint brush.



硅酸鋁保溫砂漿注意事項


◆施工前須先確定底材的垂直及平整度,施工前需要提前潤濕墻面,以無明水為宜。
Must first determine the base material and the vertical roughness before construction, advance wetting wall construction, with no water.
◆攪拌好的膏漿應在5小時內用完,切忌把已干結的膏漿加水混合使用。
Should be finished within 5 hours - mixing paste well, avoid the paste has a dry water mixed use.
◆分格線、滴水槽、門窗框上的殘留存膏漿應及時清理干凈。
The dividing line, water tank, door and window frame on the residual deposit paste should be clean.
◆各構造層在凝結前應防止水沖,撞擊振動以保證其有足夠的強度。
The various structural layers should prevent water condensation in the former, the impact of vibration to ensure enough strength.
◆在腳手架上施工時,工具、器具、用具、材料等應分散擺放穩妥,防止墜落,注意施工安全。
The construction on the scaffold, tools, appliances and materials should be separated to prevent falling, and pay attention to the construction safety.
◆注意作業時環境溫度應不低于5℃,風力應不大于5級。嚴禁雨天施工,雨季施工時做好防雨措施。
We pay attention to the work environment temperature should be no less than 5 degrees, the wind should not be greater than 5. The rain is strictly prohibited construction, complete the rainproof measures during construction in rainy season.


以下產品    詳細咨詢18832673888   進入網站查看詳細情況

 

保溫砂漿 www。hdbwsj。com

硅酸鹽板

阿里巴巴華東官網

阿里巴巴華東分店 huadong.1688.com


最新评论
請先登錄才能進行回復登錄
  • 电话直呼

    • 18831662333
    • 銷售經理 :
    • 售前咨詢 :
    • 售前咨詢 :
    • 售后服務 :
    • 售后服務 :
    • 合同簽訂/施工方案 :
    • 合同簽訂/施工方案 :
  • 掃一掃,關注旺鋪

2019免费网赚资源 介绍下靠谱的网赚项目 山东群英会走势图表 网赚学院是真的吗 为什么网赚这么难呢 吉林快3开奖 云南11选5 网赚教程 网赚论坛 山东群英会app