我公司主要生產無機保溫砂漿、玻化微珠保溫砂漿、珍珠巖保溫砂漿、聚苯顆粒保溫砂漿、硅酸鹽保溫砂漿、硅酸鎂保溫砂漿,歡迎前來選購

首頁 >> 公司新聞 >>疑難解答 >> 復合硅酸鎂保溫砂漿
详细内容

復合硅酸鎂保溫砂漿

时间:2016-07-22     作者:www.vfeqvs.com【转载】   阅读

硅酸鎂保溫砂漿介紹


復合硅酸鎂保溫砂漿(干粉)是以特種無機膠凝材料為在基料,以優質無機輕體材料為填料,摻入多種有機、無機改性外加劑,采用預混合干拌技術加工而成的一種干粉狀保溫材料。該材料在施工現場經加水攪拌后成為施工性良好的均勻粘稠漿體,其主要性能是:防水抗滲、導熱系數低、結構穩定、質輕、吸音好、粘結力強,能有效地克服墻體裂縫,同時還有無毒、無味、不燃等特點,施工簡便。
Composite magnesium silicate thermal insulation mortar (dry powder) is a kind of dry powder heat preservation material, which is based on special inorganic cementitious materials, with a variety of organic and inorganic modified additives, with the addition of a variety of organic and inorganic additives. The material in the construction site by mixing water into uniform viscous slurry construction is good, its main performance is: waterproof, low thermal conductivity, stable structure, light weight, good sound absorption, strong adhesion, can effectively overcome the cracks in the wall, as well as non-toxic, tasteless, non flammable and other characteristics, construction simple.


硅酸鎂保溫砂漿特點


以多種優質輕體無機礦物質為填料,滲配適量化學添加劑和復合高溫粘合劑,經特殊工藝復合精制而成。具有防水抗滲、質輕、阻燃、美觀、導熱系數小、隔熱性能好、粘接強度大、干燥時 間短、便于運輸等特點。使用壽命是傳統保溫材料的3-4倍,保溫層厚度是傳統保溫材料的1/3-1/5。
With a variety of high quality light body mineral as filler, infiltration with appropriate chemical additives and composite high temperature adhesive, the special process of composite refining. It has the characteristics of water resistance, light resistance, light resistance, flame retardant, beautiful, small thermal conductivity, good thermal insulation properties, high bonding strength, short drying time, convenient transportation and so on. Service life is 3-4 times of the traditional insulation material, insulation layer thickness is the traditional insulation material 1/3-1/5.


硅酸鎂保溫砂漿使用方法


首先將被保溫物表面重垢除去,直接加水浸泡涂料1-2小時,并不斷翻和成膏狀物。施工時采用直涂法,將該品經緯交叉輕涂輕抹。首次涂層厚度不宜超過5mm,干后再涂第二層 涂層厚度10-15mm,直至達到保溫層厚度,待表面稍凝后壓光,養護處理即可
First of all, the surface of the heat preservation material is removed, the direct water immersion coating 1-2 hours, and continue to turn into paste. When using the direct coating method, the article will be the product of light and cross light. The thickness of the first coating is not more than 5mm, and then coated with second coating thickness 10-15mm, until the insulation layer thickness, the surface slightly after the pressure light, curing can be

以下產品    詳細咨詢18832673888   進入網站查看詳細情況

 

保溫砂漿 www.vfeqvs.com

硅酸鹽板

阿里巴巴華東官網

阿里巴巴華東分店 huadong.1688.com


最新评论
請先登錄才能進行回復登錄
  • 电话直呼

    • 18831662333
    • 銷售經理 :
    • 售前咨詢 :
    • 售前咨詢 :
    • 售后服務 :
    • 售后服務 :
    • 合同簽訂/施工方案 :
    • 合同簽訂/施工方案 :
  • 掃一掃,關注旺鋪

9号棋牌APP 2019国外网赚 幸运时时彩 2019免费挂机网赚 网赚论坛是真的吗 网赚投资是真的吗 广发彩票 2019网赚游戏 上海11选5 2019最新免费挂机网赚